Axis

Counter status:

When disabled, the counter will not run and thus no data will be stored.

This is the name that will show up in AXIS Store Data Manager.

Calibration mode:

For Height setting the counter will use the camera height for calibration. This is the recommended setting for best accuracy.

Usually the cameras height (in cm) above the floor. The visual height may differ slightly from actual height due to type of lighting conditions.

The counting sensitivity of the counter. Increase to count more pedestrians and decrease to count less.

Digital zoom:

Direction in:

The direction in the camera view that is regarded as going into the shop (up/down).

Check this if the counting zone should be slightly curved.

Increase or decrease the radius of the curved counting zone by moving the slider to the right and left.

Displacement of count line. A higher value moves the count line downwards in the image, while a lower value moves the count line upwards. The offset is limited by the Visual height setting.

Increase or decrease the area within which people are counted.

Change the slider to adjust the start and stop point of the count line.